Аутори:
1. Mladen Tomić, The School of Higher Technical Professional Education, Niš, Serbia
2. Predrag Živković, Универзитет у Нишу, Машински факултет, Serbia
3. Mića Vukić , Универзитет у Нишу, Машински факултет, Serbia
4. Mirko Dobranjac, University of Banja Luka, Faculty of mechanical engineering, Republic of Srpska, Bosnia and Herzegovina
5. Gradimir Ilić, Универзитет у Нишу, Машински факултет, Serbia

Апстракт:
Matrix heat exchangers, also known as perforated plate heat exchangers, invented in 1940-is are finding increasing use in cryiogenics. They are representing an effective heat transfer devices, because of their high surface-to-volume ratio. The mechanism of heat transfer process in a matrix heat exchanger is very complex. There are two heat conduction paths: one along the perforated plates, and the other across the spacer plates, as well as three convection surfaces: front face of a plate, back face of a plate, and the inner wall surface area of every perforation. There have been many derived correlations of Nusselt number, heat transfer coefficient and friction factor in terms of Reynolds number, and matrix heat exchanger geometry (plate thickness, spacer thickness, porosity, perforation arrangements etc.). This paper summarizes a literature review performed in order to study current work in matrix heat exchangers.

Кључне речи:
heat transfer,matrix heat exchanger,review

Датум пријаве сажетка:
15.02.2013.

Конференцијa:
DEMI 2013

Пријављени рад од аутора